Differences

This shows you the differences between two versions of the page.

--- programming:gtk4 [2022/03/21 05:07]
nanodano
+++ programming:gtk4 [2022/03/21 05:19] (current)
nanodano
@@ Line 150: / Line 150: @@
 cd libsigc++-3.2.0
 cmake .
+./autogen.sh --prefix=/usr/local --enable-static
 make
 sudo make install
@@ Line 158: / Line 159: @@
 tar xzf glibmm-2.70.0.tar.gz
 cd glibmm-2.70.0
-./autogen.sh --prefix=/usr/local
+./autogen.sh --prefix=/usr/local --enable-static
 make
 sudo make install
@@ Line 167: / Line 168: @@
 tar xBf cairomm-1.16.1.tar.xz
 cd cairomm-1.16.1
-./autogen.sh --prefix=/usr/local
+./autogen.sh --prefix=/usr/local --enable-static
 make
 sudo make install
@@ Line 176: / Line 177: @@
 tar xzf pangomm-2.50.0.tar.gz
 cd pangomm-2.50.0
-./autogen.sh --prefix=/usr/local
+./autogen.sh --prefix=/usr/local --enable-static
 make
 sudo make install
@@ Line 185: / Line 186: @@
 tar xBf gtkmm-4.6.0.tar.xz
 cd gtkmm-4.6.0
-./autogen.sh --prefix=/usr/local
+./autogen.sh --prefix=/usr/local --enable-static
 make
 sudo make install
@@ Line 193: / Line 194: @@
-When compiling, use ''-std=c++20'' flag. When running, you may need to set LD_LIBRARY_PATH if you installed to a special prefix.
+When compiling, use ''-std=c++20'' flag. When running, you may need to set LD_LIBRARY_PATH if you installed to a special prefix. Maybe able to add ''-static'' if you built all libs with ''--enable-static' configuration and a ''.a'' file is in the lib dir.
 <code bash>

DevDungeon Wiki